Seiko LTP F Series Spezifikationen PDF herunterladen (Seite 19)

-１

１１

１

CHAPTER 6

CONSIDERATIONS WHEN MOUNTING THE AUTOCUTTER

The autocutter is for an exclusive use of our LTP F Series Thermal Printer Mechanism.

When this autocutter is used in combination of printers other than LTP F Series safety, cutting quality

and life cannot be guaranteed. The following shows considerative points when mounting the autocutter

to the LTP F Series Thermal Printer Mechanism.

6.1 MOUNTING THE MOVABLE BLADE UNIT

(1) Mount the movable blade unit to the LTP F Series Thermal Printer Mechanism with recommended

screws using the dowels shown in Figure 6-1 for positioning.

Recommended mounting screws: JIS 1188 W Pan head machine screw (small, crest

circle type) M3×6.

(2) The autocutter has a screw hole for a screw to attach a ground wire on the plate at the back of the

autocutter. Fix the ground wire with the M2.6 screw and connect it to the FG (Frame Ground). At

this time, select such screws so that the screws can be within 3 mm inside of the mounting surface.

Figure 6-1 Mounting the Autocutter Unit

Positioning bosses

Screw hole for mounting the GND wire (M2.6)

Screws

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

Keine Kommentare

Seiko LTP F Series Spezifikationen Seite 19