Seiko LTP F Series Spezifikationen Seite 11

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 31
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 10
3
33
3-
--
-
CHAPTER 3
SPECIFICATIONS
3.1 GENERAL SPECIFICATIONS
Table 3-1 lists the general specifications of the autocutter.
Table 3-1 General Specifications
Item Specifications
Model number ACUF224A-E
ACUF224C-E
3
ACUF224B-E
ACUF224D-E
3
ACUF324A-E
ACUF324C-E
3
ACUF324B-E
ACUF324D-E
3
Cutting method Sliding type
Applicable paper width 60 mm 82 mm
Cutting condition One point left
without cutting
(Leave 2±0.5mm)
Full cut
One point left
without cutting
(Leave 2±0.5mm)
Full cut
Applicable paper thickness 60 to 80 µm
Paper curling direction tendency
Fixed blade side
Motor DC24 V ± 10 %
Drive voltage
1
Detector
(Control switch)
DC5 V ±10 %
Startup current Max. 1.2 A
Minimum paper cutting length 10 mm
Minimum paper winding diameter
Ø18 mm
Operating time 600 msec max./cycle
Cutting frequency
2
30 cuts/minute at maximum
Operational life 1,000,000 cuts
4
Operating temperature/ humidity
0°C to 50°C
35 % to 85 % (no condensation)
Storage temperature/ humidity -20°C to 60°C
35 % to 90 % (no condensation)
External dimensions (mm)
(W×D×H)
80 × 64 × 19 (mm) 102 × 64 × 19 (mm)
Mass Approx. 130 g Approx. 150 g
1
Drive voltage indicates value measured at connector pins.
2
Should be 2 sec/cycle.
3
The mounting method on the platen unit is deferent. (Refer to "6.2 MOUTING FIXED BLADE")
4
As per the following conditions
Paper: PD160R-N (Oji Paper Co., Ltd.) Paper insertion angle: Within 15°from the direction vertically to the paper inlet
Paper curling direction: Fixed blade side Paper cutting environment: Room temperature and humidity
Voltage between the motor terminals: 24 V Cutter installation dimensions and position: Position (A) shown in
Figure 6-3
Other: Do not wipe out grease applied on the movable blade guideway.
Seitenansicht 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare