Seiko V-64S Betriebsanweisung PDF herunterladen (Seite 113)

3-25

Operation panel of menu operation

q Explanation of each menu operation

(4) DRY TIME VALUE

Set the paper scanning wait time. The printer

goes on to the next scan after the wait time

congured for each scan.

00 to 99 Inputs in unit of second.

(5) PRINT MODE

Select PRINT MODE.

NORMAL1 (4 passes)

NORMAL2 (4 passes)

QUALITY (8 passes)

DENSITY (8 passes)

DRAFT (2 passes)

FINE DRAFT (4 passes)

There are 6 types of print mode. Choose the suitable mode to meet the type of media,

productivity and image quality.

1. NORMAL1 [productivity + image quality weight] (4 passes)

This the print mode that will mostly be used. The input data of 720 ×720 dpi is printed in the resolution of

720 × 720 dpi. Normally, use this mode.

2. NORMAL2 [image quality weight] (4 passes)

The input data of 720 ×720 dpi is printed in the resolution of 720 × 720 dpi. If getting banding in print in

[NORMAL1], use this mode. However, the printing speed is 30 % slower than in [NORMAL1].

3. QUALITY [image quality weight] (8 passes)

Printing is in the same resolution of 720 × 720 dpi as in [NORMAL1/2]. When using a media with low drying

speed, if you mind non-uniformity of print, use this mode. However, the printing speed is slowed down to

about one half of [NORMAL1].

#DRY TIME VALUE

>XX:00sec

XX : Selected media

For characteristics of print mode,

refer to the list below.

#PRINT MODE

>XX:NORMAL1

XX : Selected media

IP-5610取説_E.indb 25 09.4.3 3:14:41 PM

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 232 233

Keine Kommentare

Seiko V-64S Betriebsanweisung Seite 113