Seiko LP-1020L Betriebsanweisung PDF herunterladen (Seite 87)

2-45

Chapter 2 Basic operations

(3) Place the roll in the drawer

Load the roll of the 8.5×11 inch series to be used into the roll paper

drawer.

See page 2-16 for instructions on loading the paper roll.

When using the cut paper of the 8.5×11 inch series, this step is not

needed.

(4) Setting the paper menu

Set the media series of the drawer into which the roll of the 8.5×11 inch

series was set to the 8.5” series (page 7-2).

When using the cut paper of the 8.5×11 inch series, this step is not

needed.

(5) PDL setup

Set the auto media series of the PDL setup for the port to transfer the data

to 8.5” series (page 5-11).

(6) If not operated as expected

If the preset series does not work as expected, check the process from

steps 1 to 5 again.

Note

◆All of the apply rolls of the same series cannot be set to OFF

at the same time.

◆If this setting is changed, the device must be restarted.

▼Using paper of new standard series

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 289 290

Keine Kommentare

Seiko LP-1020L Betriebsanweisung Seite 87