Seiko SLP410 Betriebsanweisung PDF herunterladen (Seite 4)

5 If any of the following conditions occur, turn off the printer and unplug the power cord

from the power outlet:

• The power cord is damaged or frayed.

• Liquid has been spilled into the printer or the printer has been exposed to rain or water.

• The printer does not recover from an error or the printer does not operate normally when

the operating instructions are followed.

• The printer exhibits a distinct change in performance, such as emitting a strange noise,

odor or smoke.

6 Before using your SLP, please remove the clear protective tape covering on the engine

cover and Roll cover.

7 When the SLP is unused for a period of time without a label, the platen rubber may

become stuck. This condition may cause a fatal error in the printer mechanism. To avoid

this, please keep a label loaded in the SLP — even when not in use.

Installation

For best performance, we recommend that you install your printer on a ﬂat surface in a

location that satisﬁes the following environmental conditions:

• Not subject to vibration

• Not exposed to direct sunlight

• Dust-free

• Condensation-free

• Temperatures: 15 to 35°C (59 to 95°F)

• Humidity: 30% RH to 80% RH (non-condensing)

1 2 3 4 5 6 7 8 9 ... 23 24

Keine Kommentare

Seiko SLP410 Betriebsanweisung Seite 4