RECALL
BLOCK
LAP
STOP
BATT.
LAP
①Show the time/calendar mode.
③Press recall button again to return to the time/calendar mode.
SPLIT
RECALL
BLOCK
LAP
STOP
BATT.
LAP
②Press recall button to show the contrast adjustment display.
The contrast can be adjusted for 10 levels from level "1" to "10".
The display is the lightest at level "1" and the darkest at level "10".
Contrast adjustment display
Button ○
A
: Increasing the level (darker)
Button ○
B : Decreasing the level (lighter)
ID
３.Adjustment of the contrast on the display
・The contrast of the display can be adjusted.
10.PRECAUTIONS
（１）When the power switch of the printer is turned on during the measurement, the data measured thereafter will be printed out.
（２）While the printer is printing out, do not pull out the roll paper or do not pull it back. Also, do not operate the stopwatch without
installing the roll paper on the printer, as this will cause a malfunction of the printer.
（３）When the printer is not used, be sure to turn the power switch of the printer "OFF".
（４）The optional parts (such as grip switch) is not used, besure to put the cap on the jack.
Remarks on roll paper (thermal paper)
Since this model is a thermal printer, which prints on thermal paper by heating it, it is not necessary to replace the ink. Be sure to observe
the following.
●To preserve new thermal paper, put it in a box to avoid direct light and keep it in a dry cool place.
●Do not touch the printing surface of the thermal paper, as the sweat or oil on the palm will cause poor printing.
●Besides the thermal paper S950 included with the printer, the thermal paper S951 is available for printing out the stored data. It is a
long-type thermal paper that can print out up to 2,800 lines, and sold for ¥578 (include Tax). To use S951, the paper holder SVAZ007
for exclusive use with it is necessary. It is sold separately for ¥3,990 (include Tax).
●To preserve the printed thermal paper, be sure to observe the following.
[1] Do not expose thermal paper to bright light for a long time. Printed digits or letters may be faded.
＊Be sure to use the roll paper S-950 or S-951 for exclusive use with this model. Otherwise, detective printing or damage of the printer will be caused.
[2] Keep the thermal paper away from high temperature, high humidity, or direct sunlight. The roll paper may be discolored.
[3] In case the printed paper are kept attached on a pasteboard, etc., do not use the paste or adhesives containing volatile organic solvent.
Also, do not use cellophane adhesive tape. The thermal paper may be discolored. It is recommended that the starch or synthetic paste
be used.
[4] Do not place the thermal paper near the copies reproduced by the copier using ammonia. The thermal paper may be discolored.
[5] Do not leave the thermal paper in contact with vinyl chloride films for a long time. It may be discolored, or the printed digits or letters
may be faded.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern